WANTOK
ENTERPRISES LTD ![]()
This equipment is available separately to augment or upgrade existing radio stations. The following types of commercial equipment are used in the manufacture of our studio consoles. This equipment is available to upgrade or expand systems on an individual basis.
Click on Image for a larger view
Six Channel Audio Mixer
This particular unit features four line inputs, RCA connectors and two microphone inputs (High/Low impedance). It can operate in both Mono/Stereo operation and has a dual channel visual modulation level display. It has a channel pre-selection for cue and control as well as an audio monitor level control. It also features dual high and low level outputs for connection to an audio line amplifier for outdoor broadcasts or simultaneous PA audio and RF radio broadcasting.
MP3/CD Player
The MP3/CD player is capable of playing both MP3 recorded compact discs and regular compact discs.
CD operating features include continuous play, skip track search, pause/cue capability, random play, programmed play, repeat play and introductory scan. These units have a digital buffer memory that stores up to 60 seconds of play to prevent skipping if the console is accidentally bumped.
MP3 operating features will support a maximum 256 directory MP3 discs or a maximum 512 track (file) MP3 discs. All of the play mode features of the CD player also apply to the MP3 discs. In addition, it features Directory Playback and Directory Program.
Tape Cassette Recorder/Player
These units feature full play and record capability. They have pause and cue with a mechanical tape counter to assist in locating various tracks on the tape, they readily plug in and out of the console and come with an additional microphone, edit plug and edit cord to permit field recording and editing of local material. These units utilize standard 30, 60 and 90 minute cassette tapes.
Click on Image for a larger view

Microphones
These microphones are a high-quality, high sensitivity, wide range unidirectional microphone. The flexible neck permits easy adjustment for individual operators. Their directional pickup pattern cuts down on unwanted background sounds and allows greater distance between the microphone and the sound source reducing feedback problems. They feature a wire mesh screen to cut down on breath pops and an XLR connector for a balanced low impedance connection.
Click on Image for a larger view
![]()
In-Line Amplifier
This is a small audio amplifier that simply plugs into any audio line using RCA jacks. It requires 12 Volts to operate and it efficiently boosts any audio signal. On the Wantok equipment the 12 Volts may be tapped right off the audio board or from the auxiliary 12Volt source on the back of the panel.